컨텐츠 바로가기


board


현재 위치

  1. 게시판
  2. 자료실

자료실

MUP 제품 자료실 입니다

Takamine PreAmp-DSP
제목 Takamine PreAmp-DSP
작성자 대표 관리자 (ip:)
  • 작성일 2007-11-21 20:09:20
  • 추천 추천 하기
  • 조회수 1536
  • 평점 0점
 

THE TAKAMINE DSP PREAMP

FULLY DIGITAL, FULLY PROGRAMMABLE..


 



        N4B Diagram
 


DSP PREAMP FEATURES

            

    ACOUSTIC DSP-세계 최초의 Digital EQ/ Reverb/ Tuner

    Takamine의 혁신적인 EQ기술로서 탄생된 세계최초의 Digital EQ/ Reverb/ Tuner.
    Factory Presetting과 개인적인 조건에 맞는 Saving기능과 Feedback 조정기능으로
    완벽한 연주조건을 제공하는 신개념 EQ

    DSP EQ는 선택사항으로 기존 EQ제품을 그대로 사용하면서
    추가로 선택하여 교환장착이 가능합니다
    .


    Acoustic DSP PREAMP FEATURES

    1. "Increase Volume" & " Decrease Volume"
        보륨량의 증가와 감소를 조절하는 푸시 스위치

     

    2. "Increase Bass" & " Deacrease Bass"
        Bass음색의 량을 증가와 감소시키는 푸시 스위치

     

    3. "Increase Treble" & " Decrease Treble"
        Treble음색의 량을 증가와 감소시키는 푸시 스위치

     

    4. "Increase Reverb" & " Decrease Reverb"
       -Reverb의 량을 증가와 감소 시키는 푸시 스위치
       -DSP에서 Reverb는 "Bright"와 "Dark" 두가지로 구분하여 조정할수있다.
        (Indicate에 "d"나 "b"로 표시되며, Reverb스위치 둘 다를 같이 느르면 그 선택이 바뀐다.)

     

    5."Tune"기능
       -Tuner기능은 2가지 모드를 선택할수있다.
         처음 버턴을 누르면 출력신호를 외부에 보내면서 튜닝을 하는 모드이며,
         한번더 누르면 외부로의 출력신호를 보내지않는 상태에서 튜닝하는 모드이다.
      - 세번째 누르면 튜닝모드는 해제된다

    .

    6. "Mute" LED
       -"Volume Increase"와 " Volume Decrease"를 동시에 같이 누르면 "Mute" 모드가 되어
         기타의 출력신호가 차단되며
       -"Volume" 어느 기능의 푸시 스위치든 다시 누르면 "Mute"모드가 해제된다.
       -"Mute" 에서는 "Mute LED"에 불이 들어온다.
       
    7.
    "Sub Function" & " Sub Function LED"
       -이 기능으로서 PArametric EQ기능인 Frequency Select/ Frequency Level과 Feedback Absorber기능을
         조정할수있다.
       -"Sub Function LED"에 불이 들어온 상태(Sub Function동작)에서는
    위 세가지기능으로의 조정 모드로 가고
       -Sub Function이 아닌 일반 모드에서는 BASS/ TREBLE/ REVERB조정 모드로 된다.
       -"Frequency Select"로 원하는 영역을 조정하려는 경우 먼저  "Frequency Level"을 확인하여
    가청범주에 있도록 하는것이 필요하다.
      -"Feedback Absorber"기능은 연주의 환경에 따른 여러가지 조건에 맞도록 
    "Feedback"을 조정할수있게하여 보다 안정된 연주조건을 만들어준다.

     

     8. "UP/ DOWN"- Factory Preset EQ선택기능
        -Presetting된 EQ내용을 Up/ Down으로 선택하는 기능이며 0-9의 내용으로 되어있다
        -그 선택된 번호는 "Alphanumeric Display"창에 표시되며, 그 옆의 작은 LED가 불이 들어온다.

     

     9. "Write" - 개인적인 EQ Setting기능
        -원하는 EQ내용으로 조정한뒤 "Wriet"버턴을 한번 누르고 원하는 EQ번호를 선택한뒤
    다시한번 "Write"를 누르면 원하는 EQ내용으로 Save  Setting된다.
       -개인적인 EQ setting에서는 "Alphanumeric Display"창의 위 옆의 작은 LED의 불이 들어오지않는다.

    무단복제금지


     
  1. Volume level is controlled by the increase and decrease
            buttons.

     
            
  2. Bass and Treble are independently
            controlled by the increase and decrease buttons.

     
            
  3. DSP features a selectable "two-tone" Reverb on board. Reverb
            has a dark reverb adjustment and a bright reverb adjustment, indicated as a
            "d" or "b" in the Alphanumeric Display. The "d & b" functions are switched
            by pressing both "REVERB" buttons together. Reverb Level is controlled by
            the increase and decrease buttons.

     
            
  4. The Tuner is activated by pressing the "TUNE" button.
            One press allows tuning the guitar with sound to the output. A second press
            mutes the output to allow silent tuning. A third press disables the tuner.

     
            
  5. The "MUTE" feature silences the sound output. Press
            both the "VOLUME" increase and decrease buttons together to activate. Press
            either button to de-activate. Please notice the "MUTE" LED indicator when
            engaged.

            

            The Sub Function button, "SUB FUNC" is used to activate the
            Frequency Select, Frequency Level, and the Feedback Absorber functions. When
            the Sub Function LED is on, these three functions are active and the
            BASS/TREBLE/REVERB functions are inactive. Each can then be adjusted by the
            increase or decrease buttons.

            

            The Parametric Equalizer offers versatile tone adjustment
            for variations in acoustic environments. In the "SUB FUNC" mode, the "F.LEVEL"
            must be first either increased or decreased to enable hearing the change in
            Frequency selection. "F.SELECT" is then adjusted by pressing the increase or
            decrease buttons, to sweep through the tonal frequency range.

     
            
  6. Factory Preset EQ Settings are changed by using the
            "UP/DOWN" buttons. These are indicated by the numbers "0 - 9" with the small
            red LED lit in the top left corner of the Alphanumeric Display window.

     
            
  7. Personal Memory Settings are indicated by the numbers
            "0 - 9" without the red LED. To create a personal memory setting, first
            choose a factory preset that you'd like to start from ("0" is the flattest).
            Then make any EQ adjustments you prefer. Next, push "WRITE" and the display
            will blink slowly. Then change the preset number to any number without the
            red dot lit. This will be your personal number for that EQ setting. Lastly,
            press "WRITE" one more time and the LED will blink three times to confirm
            that it is saved.

     
            
  8. The Feedback Absorber, "FBA" offers variable adjustment
            for averting feedback problems in different acoustic environments. In the
            "SUB FUNC" mode, the "FBA" increase button must first be pressed to increase
            the feedback attenuation. While holding the increase button, press the
            decrease button to change the feedback note (shown in Alphanumeric display).
            Feedback will be eliminated by attenuating the correct fundamental note.

첨부파일
비밀번호 삭제하려면 비밀번호를 입력하세요.

목록

삭제 수정 답변

댓글 수정

비밀번호

수정 취소

/ byte

댓글 입력

이름 비밀번호 관리자답변보기

확인

/ byte


* 왼쪽의 문자를 공백없이 입력하세요.(대소문자구분)

관리자에게만 댓글 작성 권한이 있습니다.